Joined in 2023 
82 
63 About this deal
There are several possible causes for Micro SD Card Not being Detected on Reolink App. You may follow the troubleshooting tips listed below to solve the problem. Argus Eco, E1 Outdoor, E1 Pro, e1 pro PTZ, RC410, RCL-410, RCL-810A, reolink: rlc-410-5mp, rlc 410w, rlc-410-5mp, rlc-411ws, RLC-423, RLC-510A, RLC-511, RLC-520, RLC-520-5mp, rlc-522, rlc-810a, RLN16-410 When IR light entity is OFF always OFF, when ON IR LEDs will be on when the camera is in night vision mode, see the Day night mode select entity. Sensor entities
PTZ preset positions can be set in the Reolink app/windows/web client, the names of the presets will be loaded into Home Assistant at the start of the integration. When adding new preset positions, please restart the Reolink integration. My RLC 520a is running the latest firmware 3.0.0.494 and I have also tried the previous version 3.0.0.250. If you fail to add Reolink cameras to Synology, please follow the below steps to make troubleshoot. To ensure you have the best latency possible, refer to the Reducing latency of motion events section. Asterisk (*) next to entities listed in this documentationThis issue is related to the function of the camera itself, and it is indeed a temporary workaround solution so that your camera can maintain the synchronization of audio and video. After plugging the new camera to the NVR, the camera's image does not show up on the monitor and it prompts "video loss". The following troubleshooting may be helpful to you. A822, ALL, Argus, Argus PT, B500, B820A, C1 PRO, c1pro, C1-Pro, C2 Pro, C2-Pro, D800, Duo, Duo 2, Duo 2 Wifi, E1 outdoor, E1 pro, e1 pro PTZ, E1 pro sub, E1 Zomm, E1 Zoom, Inside, Other, RCL-410, RCL-410-5MP, rcl-420, RCL-510WA, rcl-511, RCL-520, rcl-522, RCL-810A, REOLINK C2, Reolink RCL-410, REOLINK RLC-423, reolink: rlc-410-5mp, Reolink-820a, rlc 410w, RLC 482a, rlc 510, RLC 520, RLC 842, RLC-1220A, RLC-410, rlc-410-5mp, RLC-410-5MP, RLC-410W, RLC-410WS, RLC-411, RLC-411WS, RLC-420, rlc-420-5mp, RLC-420-5MP-V2, RLC-422, RLC-423, RLC-423WS, RLC-510A, RLC-510AW, RLC-510WA, RLC-511, RLC-520, RLC-520-5mp, rlc-520a, RLC-522, RLC-542WA, RLC-810, rlc-810a, rlc-810c, RLC-811A, RLC-812A, rlc-820a, rlc822a, RLC-822A, rls-410s, RTC-410, RWC-511, w511
To set up the camera, you need to connect the camera to a PoE switch/injector for network connection. After that, you may finish the initial setup via both Reolink App and the Client. Unsurprisingly, the Reolink RLC-520A shares the same design with the RLC-520 since it’s supposed to be a replacement for the older series. I have been using Reolink cameras for about 2 years connected to Synology Surveillance Station (SSS). About 6 months ago I upgraded my 4 cameras to RLC 520a's as I really wanted the person detection features. With the latest firmware this works beautifully with SSS - triggering it correctly according to my camera settings. Connect your PoE camera to the PoE NVR by a single network cable, then the PoEcamera will get power via the PoE NVR.Not all camera models generate ONVIF push events for all event types, some binary sensors might, therefore, only be polled. Or if you want to make Reolink NVR work with the camera, its connection diagram will be like below: PTZ left, right, up, down, zoom in and zoom out will continually move the camera in the respective position until the PTZ stop is called or the hardware limit is reached.
Do not place the camera in a shaded area and point it towards a well-lit area. Or, it may result in poor image performance. For better image quality, please make sure that the lighting condition for both the camera and the captured object is the same. C1 Pro, DUO POE 2, E1 pro, RCL-511W, RCL-520, RCL-810A, Reolink 411, reolink: rlc-410-5mp, rlc-410-5mp, RLC-510A, RLC-520, RLC-520-5mp, rlc-810a If an entity listed below has an asterisk (*) next to its name, it means it is disabled by default. To use such an entity, you must enable the entity first. Number entitiesFloodlight turn on brightness controls the brightness of the floodlight when it is turned on internally by the camera (see Floodlight mode select entity) or when using the Floodlight light entity. When the floodlight entity is ON always ON, when OFF controlled based on the internal camera floodlight mode (Off, Auto, Schedule), see the Floodlight mode select entity. A brand new Reolink camera first needs to be connected to the network and initialized. During initialization, the credentials for the camera need to be set. You may power on Reolink PoE cameras via PoE injector/switch or PoE NVR directly, or by using the power adapter. When using the siren turn-on service, the siren will continue to sound until the siren turn-off service is called.
Great Deal 
New Comment